Back To Products Page TERRAMETER SASLOG SASLOG with Reference Electrode Set. If you have access to a water filled borehole on the site of investigation a geophysical logging tool will allow you to correlate your surface data to reach a higher degree of accuracy in your interpretation of the geophysical data. The SAS LOG accessory connects to Terrameter SAS 1000 or 4000 and converts it to a logging  system for resistivity and IP. In addition to that it also measures the temperature and SP as well as gives an indication of when the water level is reached. The SAS LOG   is designed as a back-pack to enhance the portability. The log cable have fixed electrodes and at the bottom end a sonde with the sensors for the other parameters. The meter marked cable is lowered manually into the hole step by step. Readings are taken at each step by activating the measure knob of the Terrameter. Data is stored in the memory  of the Terrameter for subsequent processing and plotting in a computer with a suitable software like for example LogPlot from Rockware. Specification SAS LOG 300 & logging unit: Cable length 300m (Customized cable lengths available)Cable marking Every mSonde diameter 40 mm Weight (200 m) 16 kg 22 kg Dimensions 320x750x220 mm (WxLxH) Survey modes: 16 inches short normal resistivity and induced polarisation 64 inches long normal resistivity and induced polarisation 18 feet lateral resistivity and induced polarisation Fluid resistivity Self Potential Temperature Water level indication Range: As per Terrameter specification, except temp: 0 – 60 oC. Optional Accessories: Part No. 33 0020 11 Interconnect cable SAS 1000 / 4000 to LOG or ES 464 Part No. 33 0015 73 Reference electrode set: (consisting of: 2 x 50 m cable on one reel, 2 electrodes and 2 interconnect cables 2 m) Brochures Download SASLOG Specification Back To Products Page ABEM Instrument AB | Allén 1 | S-172 66 Sundbyberg | Sweden Phone: +46 8 564 88 300 | Email: sales@abem.se